| |
Normal RPM
Normal Tip Speed (mph)
Disc Rotor |
|
600
175 |
| |
|
Hammer Weight (lbs)
Hammer Thickness (in)
Available Impact Force (KE) (ft-lbs) |
460
4 3/4
471,208 |
| |
|
Hammer Weight (lbs)
Hammer Thickness (in)
Available Impact Force (KE) (ft-lbs) |
565
5
578,767 |
| |
Shaft Diameter (body, in)
Bearing Diameter (journal dia., in)
Disc Rotor |
20
14 |
| |
|
Disc Thickness (in)
Spacer Thickness (in)
Hammer Pin Diameter (in) |
4
5 3/4
5 7/8 |
| |
|
Spider Thickness (in)
Number of Spiders
Hammer Pin Diameter |
7 1/8
13
4 7/8 |
| |
Shredder Width Nameplate (in)
Feed Ramp Width (in)
Shredder Opening at Anvil (in)
Feed Chute Angle
Feed Chute to Anvil Relationship
Full Strength Welds |
104
101
95
40 degree
Standard
Yes |
| Casting & Inside Geometry: |
|
|
| |
|
Anvil Seat Thickness
Anvil Step Down
Anvil Seat thru Sidewall |
4”
No
Yes |
| |
|
Grate Circle
Grate Support Attachment Method
Grate Opening Geometry
Grate Supports |
Concentric
Weld
Standard
Supported/SelfSupporting Grates |
| |
|
Open or Solid
Vertical or Angled |
Solid/Open
Vertical |
| |
|
Open or Solid
Vertical or Angled |
Solid
Vertical |
| |
|
Drop-In, Pin-Held Castings (PHC)
Upper Anvil
Roof Liners Reduced Wash Out (RWO) |
Bolt-in/PHC
Standard
Standard |
| |
|
% End Disc Protection
Side Liner with Side Wall Protection at End Disc
Self Cleaning (end disk to shredder wall) |
40-50%
No
Yes |
